Violin & Viola instrument stands are (or should be) designed to safely hold and display violins when they’re not in use. So far, so obvious! But there are loads to choose from, so we’ve compiled a list of ones we trust.
Our Choice
Hercules DSP57WB Wall Mountable Violin Hanger – Wood Base
Our Rating: ★★★★★
As with all wall hangers, these can be a good choice if you don’t need to travel with your violin, or have children or pets running round, but be careful where you place the hanger (avoid radiators, for example). Wall hangers can be a good choice for musicians who prefer to keep their instrument easily accessible and on display. While prices can vary depending on the brand and materials used, it is typically a budget-friendly option compared to floor stands.
However, as always, the Hercules DS57WB offering is pretty hard to ignore. The Hercules Auto Grip System holds the instrument securely, while at the same time releases your instrument quickly when you want to play. The specially formulated foam fully protects instrument at all contact points and the wood base makes mounting easy. They also do a slatwall offering, but this is more for retail rather than domestic use.
The Hercules stands (both regular and Travlite ones) have their auto-grip system and comes with a carry bag and a detachable rosin holder which is useful. The Hercules DS571B Violin/Viola stand is an excellent choice for violinists who want a robust high-quality stand. The stand provides excellent stability due to its well-designed base. It has rubber feet that prevent it from slipping on various surfaces and your violin will rest securely and safely on the stand, thanks to the soft, foam-covered supports that gently cradle the instrument and ensures that the violin is held firmly in place without the risk of it tipping over or getting damaged.
This is a floor stand that securely holds the violin in an upright position. Itโs useful if they also have a bow holder which is why the Cobra one is quite a good budget choice. Lightweight and compact, it is reasonably stable, with non-slip rubber feet. The design is clean and unobtrusive, although not quite as sleek as some more expensive models (if that kind of thing bothers you!) However, the main drawback with both is that it doesn’t, in my opinion, quite got the same level of stability as the Hercules so if you have an expensive instrument, Iโd be careful using this one. Fine as a budget option though.
Another floor stand that securely holds the violin in an upright position. It also ha a bow holder which is why it’s quite a good budget choice, and is, consequently a popular choice. It has a sturdy design and comfortably holds violins and violas. Lightweight and compact, it is reasonably stable, with a solid base and non-slip rubber feet. The design is clean and unobtrusive although, like the Cobra not quite as sleek as some more expensive models (if that kind of thing bothers you!) However, the main drawback with both is that they havenโt, in my opinion, quite got the same level of stability as the Hercules so if you have an expensive instrument, Iโd be careful using these ones. Fine as a budget option though.
The Hercules stands (both regular and Travlite ones) have their auto-grip system and comes with a carry bag and a detachable rosin holder which is useful.
One of the standout features of the TravLite stand is its portability. The stand is lightweight and foldable, making it easy to carry around. It fits comfortably into most oblong violin cases but you may need to take care in smaller shaped cases. Itโs quick to set up and fold down and is an excellent product for violinists seeking a reliable, portable, and easy-to-use stand. The combination of durability, stability, and convenience makes it an excellent choice for both beginners and professional musicians and worth the slightly higher price than some rival offerings.
When selecting a keyboard stand, itโs worth taking some time to consider the following factors:
How much does your keyboard weigh and will the stand you are considering support the weight of your keyboard. You will need a more stable stand such as a Z style or table-style stand if you have a heavy keyboard stand or a have a rigorous playing style. Also check the adjustability of the height and width to make sure you can get a comfortable playing position.
If you need to transport the stand frequently for gigging, look at good lightweight and foldable stands. Additionally, some stands come with additional tiers or racks for extra equipment.
X-Style Stands have an “X” shape and are one of the most common types due to their affordability and portability. These tend to be lightweight and easy to fold and transport. The downside is that they may not be as stable for heavier keyboards and can have limited adjustability in width (there are usually only 4 settings). They stands can be single or double brace (i.e double X), with the double brace style stands giving better stability. The biggest drawback with X style stands is playing your keyboard in the seated position. As soon as you sit down, it’s hard to position yourself without knocking your knees into the brace, which in true domino style can result in the keyboard getting knocked off the stand.
Z-Style Stands have a “Z” shape, providing better stability and more surface area for the keyboard. They tend to be more stable that the X style stands and can support heavier keyboards. This does make them heavier and bulkier to transport. I like the Roland KS 11Z and the Hercules KS400B. Neither are cheap, but they give good support to your (possibly quite expensive) keyboard.
The Roland KS 11Z is one of the best around – a really solid stand at 10 kg. The KS-11Z provides a robust and stable platform which can handle portable keyboards and pianos with up to 88 keys and weighing up to 100kg. There are multiple adjustment points which allows you to tailor the width and height to your keyboard: There is a quick release lever for the width adjustment of between 566mm and 940mm and a spring-loaded for the height adjustment of 645mm to 917mm. The adjustable feet give good stability on uneven floors and the support arms a padded and fold down for transport and storage. The arms also quickly lock into place when putting the stand up. An impressive stand.
The Hercules KS-400B Z-Stand Keyboard Stand has a built-in AutoLock System which allows you to set the desired height by simply raising the arms with height parameters of 604.5mm to 929.6mm and you can adjust the width between 508mm and 851mm. There are fluorescent marks to allow you to adjust both arms evenly which is useful when on a dark or dimly lit stage. The locking pins give a quick and secure set up and adjustable feet give a good stable setup. Weighing in at 8kg, it has an impressive load capacity of 127.9kg
Of the more affordable options, Rockjam has a pretty good offering.
Table-Style Stands resemble a small table and often come with additional features like racks for gear. They are very stable, offer height adjustability and can hold additional equipment, but they tend to be very heavy (i.e. not as portable) and more expensive than other stands.
A couple of the K&M models are our best picks if you need a quality, robust stand, but TGI do a good offering as well.
The K&M 18950 is a high quality, steel-made table style keyboard stand. Because the legs can be individually adjusted and each leg has levelling feet, and non-slip rubber pads, it is a very stable stand. The height adjustment is from 600mm to 1,000 mm, and can take a second keyboard if needed. Weighing in at 10.7 kg it has a maximum load capacity is 80kg. As you can see here, it folds down really neatly as well.
The other K&M offering I quite like is Omega 18810. It’s very stable and robust keyboard stand (9.2kg) which has a spring-loaded height adjustment and is quick to assemble The support depth is 345mm, width is from 180mm to 790mm and the height ranges from 600mm to 1020 mm. You can also bolt on a range of attachments such as ipad and tablet holder, mic stands and even has 4 velcro tapes for cable management. All in all, quite an impressive offering.
If you don’t want to spend quite so much, the TGKT1 stand is pretty good as well. Weighing in at just under 9kg, it’s quite solid, and will support up to 80kg, giving it the same capacity as the K&M 18950. The height range is 620mm – 790mm, the width is 710mm – 1020mm, and the depth is 320mm.
Column Stands have a central column with arms extending out to hold the keyboard. These stands offer good stability and often have multiple tiers for multiple keyboards. The design of these can be quite sleek, but they are often not as adjustable as other keyboard stands and can be bulky. If you are looking at these stands you are prepared to spend (they tend to be quite expensive) so I would just go for the best on the market which in my opinion is the K&M 18860 Spider Pro. There is no Hercules offering for this style of stand, The Spider Pro is an aluminium made stand has a tripod base with adjustable legs. This stand has an innovative double tiered design with arms coming out of a wide vertical spine of the stand with tripod base. The upper arms can also be moved to a 15 degree angle which allows easier access to the keyboard on the lower arms. You can also add additional support arms and attach a third keyboard. You can also attach microphone booms. It weighs 10.8 kg and the arms have weight capacity of 35kg per level. Extra arms and a carrying case can be purchased separately.
Flute stands are essential accessories for flutists. Designed to securely hold and display flutes when they are not in use, a good stand helps prevent damage to the instrument and provide easy access during performances or practice sessions. Before you buy, itโs always worth considering if you just need a single flute stand, or one which can hold a second instrument (most commonly a piccolo, alto flute or clarinet). ย Look for stands with a sturdy base to prevent tipping: Tripod bases are common and provide good stability. ย Ensure the stand has padding or rubberized surfaces at the contact points to protect the flute’s finish from scratches and damage, and if you need to transport the stand frequently, consider foldable or collapsible designs that are easy to carry.
Stands are typically made from plastic, metal, or wood. Metal stands are durable but heavier, while plastic stands are lightweight but may be less robust.
Ultimately, the “best” flute stand will depend on your specific needs, such as whether you need it primarily for home, studio use, or frequent travel (the Hercules Travlite is a good choice here). Consider what you want in terms of stability, portability, and overall build quality to make the right choice for your situation.
My favourites, as usual are Hercules, which are renowned for their stability and durability and K&M whose high-quality stands with adjustable features and robust construction are among the best you will find.
When selecting a keyboard stand, itโs worth taking some time to consider the following factors:
How much does your keyboard weigh and will the stand you are considering support the weight of your keyboard. You will need a more stable stand such as a Z style or table-style stand if you have a heavy keyboard stand or a have a rigorous playing style. Also check the adjustability of the height and width to make sure you can get a comfortable playing position.
If you need to transport the stand frequently for gigging, look at good lightweight and foldable stands. Additionally, some stands come with additional tiers or racks for extra equipment.
X-Style Stands have an “X” shape and are one of the most common types due to their affordability and portability. These tend to be lightweight and easy to fold and transport. The downside is that they may not be as stable for heavier keyboards and can have limited adjustability in width (there are usually only 4 settings). They stands can be single or double brace (i.e double X), with the double brace style stands giving better stability. The biggest drawback with X style stands is playing your keyboard in the seated position. As soon as you sit down, it’s hard to position yourself without knocking your knees into the brace, which in true domino style can result in the keyboard getting knocked off the stand.
Z-Style Stands have a “Z” shape, providing better stability and more surface area for the keyboard. They tend to be more stable that the X style stands and can support heavier keyboards. This does make them heavier and bulkier to transport. I like the Roland KS 11Z and the Hercules KS400B. Neither are cheap, but they give good support to your (possibly quite expensive) keyboard.
The Roland KS 11Z is one of the best around – a really solid stand at 10 kg. The KS-11Z provides a robust and stable platform which can handle portable keyboards and pianos with up to 88 keys and weighing up to 100kg. There are multiple adjustment points which allows you to tailor the width and height to your keyboard: There is a quick release lever for the width adjustment of between 566mm and 940mm and a spring-loaded for the height adjustment of 645mm to 917mm. The adjustable feet give good stability on uneven floors and the support arms a padded and fold down for transport and storage. The arms also quickly lock into place when putting the stand up. An impressive stand.
The Hercules KS-400B Z-Stand Keyboard Stand has a built-in AutoLock System which allows you to set the desired height by simply raising the arms with height parameters of 604.5mm to 929.6mm and you can adjust the width between 508mm and 851mm. There are fluorescent marks to allow you to adjust both arms evenly which is useful when on a dark or dimly lit stage. The locking pins give a quick and secure set up and adjustable feet give a good stable setup. Weighing in at 8kg, it has an impressive load capacity of 127.9kg
Of the more affordable options, Rockjam has a pretty good offering.
Table-Style Stands resemble a small table and often come with additional features like racks for gear. They are very stable, offer height adjustability and can hold additional equipment, but they tend to be very heavy (i.e. not as portable) and more expensive than other stands.
A couple of the K&M models are our best picks if you need a quality, robust stand, but TGI do a good offering as well.
The K&M 18950 is a high quality, steel-made table style keyboard stand. Because the legs can be individually adjusted and each leg has levelling feet, and non-slip rubber pads, it is a very stable stand. The height adjustment is from 600mm to 1,000 mm, and can take a second keyboard if needed. Weighing in at 10.7 kg it has a maximum load capacity is 80kg. As you can see here, it folds down really neatly as well.
The other K&M offering I quite like is Omega 18810. It’s very stable and robust keyboard stand (9.2kg) which has a spring-loaded height adjustment and is quick to assemble The support depth is 345mm, width is from 180mm to 790mm and the height ranges from 600mm to 1020 mm. You can also bolt on a range of attachments such as ipad and tablet holder, mic stands and even has 4 velcro tapes for cable management. All in all, quite an impressive offering.
If you don’t want to spend quite so much, the TGKT1 stand is pretty good as well. Weighing in at just under 9kg, it’s quite solid, and will support up to 80kg, giving it the same capacity as the K&M 18950. The height range is 620mm – 790mm, the width is 710mm – 1020mm, and the depth is 320mm.
Column Stands have a central column with arms extending out to hold the keyboard. These stands offer good stability and often have multiple tiers for multiple keyboards. The design of these can be quite sleek, but they are often not as adjustable as other keyboard stands and can be bulky. If you are looking at these stands you are prepared to spend (they tend to be quite expensive) so I would just go for the best on the market which in my opinion is the K&M 18860 Spider Pro. There is no Hercules offering for this style of stand, The Spider Pro is an aluminium made stand has a tripod base with adjustable legs. This stand has an innovative double tiered design with arms coming out of a wide vertical spine of the stand with tripod base. The upper arms can also be moved to a 15 degree angle which allows easier access to the keyboard on the lower arms. You can also add additional support arms and attach a third keyboard. You can also attach microphone booms. It weighs 10.8 kg and the arms have weight capacity of 35kg per level. Extra arms and a carrying case can be purchased separately.
My favourite guitar stand supplier is Hercules. Originator of the auto-grab system, which is so convenient, these are good robust stands. Personally, I prefer stands which hold the neck (vital if you have children and dogs running around), but there are good A frames stands of you are short of space, or just want something compact. Wall hangers are a good choice, especially if you are short of floor space, but be careful not to position them above radiators or on outside walls.
No reviews found for this category.
Saxophone Stands
Saxophone stands are essential accessories for saxophonists, providing a safe and convenient place to rest the instrument when not in use. Itโs just not practical to disassemble and put it back in itsโ case when youโre going to resume playing in a few moments. Saxophones are fairly expensive and can be quite heavy so a good robust stand is essential. Look for a solid tripod or weighted base to make sure your sax doesnโt topple over. Before you buy your stand itโs worth thinking about if you want a single instrument stand, or one that will also hold multiple saxophones or your saxophone and another instrument. Also bear in mind that if you are travelling a lot with you instrument the portability and foldability of the stand is important.
Our Choice
Hercules DS535B Baritone Saxophone Stand
Our Rating: ★★★★☆
The Baritone Sax Hercules DS535B stand has a folding yoke with locking pins to secure the upper yoke in the correct position. The backrest has a lever to adjust the height and the swivel legs also have locking pins which lock the stand in place There is a peg hole if your stand needs to hold another instrument. The pegs are sold separately and will hold instruments like soprano saxophones, trumpets clarinet and flute, but the peg wonโt hold an alto or tenor sax. If you need a bari stand that also holds an alto or tenor sax, take a look at the DS536B which comes with a detachable fitting
Rather than a tripod base, the K&M 15290 stand has 5 legs which provides really good stability for the instrument. The detachable metal leg base screws into the peg so that the entire unit can be stored in the bell of the instrument for easy transport. The black plastic peg is covered with a felt ring to protect the instrument.
Hercules EZ-Safe Alto / Tenor Saxophone Stand – DS530BB
Our Rating: ★★★★☆
The Hercules DS-530BB is our pick for Alto and Tenor stands. The robust construction and stability given by the tripod base are hard to beat. The stand itself weighs just under 1kg and has a load capacity of 10 kg, which should be more than enough given that the average alto weighs just over 2kg tenors about 3 kg. It has a folding yoke, an adjustable backrest, and locking pins that lock the stand in place. To fold the stand after use, you just press the pin and hold it in. It comes with a bag which makes carrying it around with you easy. are secure and stable for use with Tenor or Alto Saxophones. A storage bag included
Of the K&M offerings the 14410 is our choice as it has an extra-sturdy tripod base with cross braces giving the legs extra load capacity and a two-piece folding design. The support bracket has several locking positions. As you would expect, the height is adjustable, and as with their alto/tenor sax stand the support arms are covered with special non-marring (i.e. non-damaging) plastic to protect instrument. One caveat; this stand has limited suitability for baritone saxophones with a low Bb, due to the shape of the bell flare.
The solid tripod legs on Hercules DS531BB provide good stability and there is a height adjustment lever (this stand will also hold a flugel horn). The velvet covered peg is detachable and the stand comes with a carrying bag.
K&M Konig & Meyer Alto or Tenor Saxophone Stand 14300
Our Rating: ★★★★☆
K&M 14300 Alto/ Tenor Sax stand is a decent offering, and a little bit cheaper than the Hercules DS-530BB. The tripod base is sturdy, and the support arms have a protective plastic coating. The height of the lower support arm can also be adjusted as there are several locking positions, and the upper support arm is flexible and can be adjusted to different bell sizes. K&M also produce a couple of peg holders which can be used with this stand and you can also get a bag, but it is not included.
We think the offerings in this comparison by Hercules and K&M are the best ones to choose from. They all offer good stability with rubber feet giving solid grip, and have good height adjustability.
No reviews found for this category.
Clarinet Stands
Before you buy, itโs worth considering if you just need a single clarinet stand, or are you going to need a stand which holds another instrument, such as a flute, as well. Either way, you will need a stable stand which has a good solid base or a tripod design. Padded pegs for the instrument to sit on are a good idea, as this prevents your instrument getting scratched. Make sure your stand fits inside your instruments case of gig bag if you frequently travel with your instrument.
Hercules Stands and K&M both have high quality offerings and are about the best available.
Our Choice
Hercules DS640BB Improved Flute/Clarinet Stand
Our Rating: ★★★★☆
The Hercules DS640BB is a high-quality single flute stand which has a velvet-covered peg to protect the instrument from scratches
If you want a really compact stand, the Hercules DS440B clarinet stand is a good option as it fits inside the bell of the clarinet. Alternatively, the K&M 15222 Compact Clarinet Stand is a good quality stand 4 leg stand which is small enough to fit in most cases.
Kรถnig & Meyer offer high-quality stands with excellent stability and durability. The K&M 15228 Pavilion stand is well-regarded for its foldable design and gives good stability from the 5 metal legs. It can also be stored insdie the bell of the clarinet which gives good portability.
If price is an issue the Nomad NIS-C043 stand is an excellent choice; the folding design collapses quickly, but isnโt quite as stable or robust as the Hercules or K&M models mentioned above.
Cello and double bass stands are essential for safely storing and displaying these larger string instruments when they’re not in use. Although there are wall hangers available, Iโve never really found a satisfactory one – I think the instruments are simply too big in the body – and would always go for a sturdy floor stand. Both K&M and Hercules have good offeringss in the mid-to-high price range. While they may be more expensive than some basic models, in each case the quality, durability, and features more than justify the investment. For me, they offer excellent value for money, especially for serious musicians who need a reliable stand.
No reviews found for this category.
Double Bass Stands
Cello and double bass stands are essential for safely storing and displaying these larger string instruments when they’re not in use. Although there are wall hangers available, Iโve never really found a satisfactory one – I think the instruments are simply too big in the body – and would always go for a sturdy floor stand. Both K&M and Hercules have good offeringss in the mid-to-high price range. While they may be more expensive than some basic models, in each case the quality, durability, and features more than justify the investment. For me, they offer excellent value for money, especially for serious musicians who need a reliable stand.
Our Choice
Hercules DS590B Double Bass Stand
Our Rating: ★★★★☆
The Hercules offering is the Hercules DS590B. As with all Hercules stands, it has a good solid construction, but lacks a bow holder and a neck brace, which I think is a disadvantage, especially on such a large and expensive instrument.
Constructed with high-quality materials, the Hercules DS580B Cello/Bass Stand is a well-regarded option among musicians for its durability, stability, and innovative design. The Hercules DS580B comes with their standard Auto Grip System holds the cello securely and specially formulated foam which protects your cello from scratches at all contact points and comes with a hook to hold the bow. As always with Hercules, the build quality is excellent.
Despite its solid construction, it is relatively lightweight and foldable, making it easy to transport. It folds down to a compact size, which is convenient for storage and travel.
For double bass players, the K&M 141 model Double Bass Stand is a sturdy (vital with such a large instrument) and adjustable floor stand. The soft rubber covered adjusting arms will hold you bass securely. Pretty much the best stand out there for basses in my opinion.
iPad and Tablet stands are a recent addition to Music Stands so it’s hard to find a decent one. If you have one you’d like us to look at please contact us using the Contact Us form and let us know.
Our Choice
Konig & Meyer 19791 Universal ipad and tablet holder
Our Rating: ★★★★★
More versatile than the 19790 is the 19791. Why is it more versatile? Well, this model can be attached to the side of any tube with a maximum diameter of 30 mm. So it will work well with many music stands as well as mic stands, which makes it our preferred option.
Like the 19790 model, the adjustable (and robust) arms will hold iPads and tablet computers at three points. The holder works with iPads, from the iPad mini to iPad Pro 13โ and with tablets which have a width of 222-224 mm, a height of 128-232 mm and a depth (thickness) of 6-11 mm and will screw onto a microphone stand via a 3/8โ or 5/8โ threaded bolts. The tension spring mechanism means it can quickly attach or detach, change between portrait and landscape positions, and swivels 90ยฐ. Bear in mind that this means it doesnโt swivel in the way that some holders do. The stand is manufactured in Germany and comes with a 5 year warranty on the product and 10 years on parts.
This is such a great holder. I love the easy swivel fitting to change from landscape to portrait format. It can be used with phones or tablet computers, and, as you would expect from Hercules, it is very robust, and I like the TightVice mechanism which securely holds your tablet or phone. Personally, I think it works better when attaching to a music stand or mic stand, rather than when clipping it to a flat surface, such as a table; it adjusts to 3cm which I think is not quite thick enough to work as well as I would like on some surfaces. It can be used with any phone or tablet from 6.1โ – 13โ. Weighs in at 570 g, and has a maximum load capacity of 3 kg, which should be more than enough for most tablet devices.
This is a music stand designed to hold your tablet device rather than printed music. We like that it is a very sturdy stand (a must for more expensive tablets), although the assembly takes a little bit of getting used to. As you would expect with K&M, the quality of the materials and the manufacturing is excellent. There are a couple of things to note: It doesn’t have the positonal flexibilty of a gooseneck style stand.
The individually adjustable support arms can be used tablets ranging in height from 128 to 232 mm, width from 222 to 334 mm, and tablet thickness of 6 mm to 11 mm. This means is is suitable for iPad, iPad Air, iPad Pro, Amazon Fire HDX 8.9, Samsung Galaxy Tab from 9.7, Google Nexus 9, Asus Transformer or Microsoft Surface as well as Surface Pro. The depth of the tablets can vary between 6 and 11 mm. The support arms settings are made by adjusting the clamp screws to the size and depth of the tablet, and the tablet can be attached and detached quickly and simply through a snap lock. You can adjust the easily adjust of the stand by the wing nut, and the tablet can be easily switched between landscape and portrait format. Is is quiet a light an compact stand with a height adjustment of between 70 and 155 cm.
Konig & Meyer 19790 Universal iPad and tablet holder.
Our Rating: ★★★★☆
Sturdy, quality offering from the ever-reliable manufacturer Konig and Meyer. The adjustable (and robust) arms will hold ipads and tablet computers at three points, this stand works with iPads, from the iPad mini to iPad Pro 13โ and tablets with a width of 222-224 mm, a height of 128-232 mm and a depth (thickness) of 6-11 mm and will screw onto a microphone stand via a 3/8โ or 5/8โ threaded bolts. The tension spring mechanism means it can quickly attach or detach, change between portrait and landscape positions, and swivels 90ยฐ. Bear in mind that this means it doesnโt swivel in the way that some holders do. The stand is manufactured in Germany and comes with a 5 year warranty on the product and 10 years on parts.
At the time of writing (November 2024),you can get a Keepdrum microfibre polishing cloth as well.
This is a traditional style tripod music stand holder, but for tablet pcโs and iPads rather than sheet music. The stand has 4 sections you can adjust the height with – from 16.7 inches (42.5 cm) to 65 inch (165 cm). It’s easy to adjust as well; just open the clasp, adjust to the shaft then close the clasp. The tripod is stable and can be easily folded for storage, and it comes with a carry bag which is handy, and along with the tripod design makes it very portable.
If you need a stand for your tablet pc or smart phone with the ability to position the screen precisely, it’s probably worth looking at a gooseneck style stand. The Lamicall offering is a good option. There are two pull strings at the back to adjust the width of the holder, the swivel fitting means the tablet can easily be positioned, and changed between landscape and portrait format. The gooseneck is quite stiff, but I think that’s a positive thing as it is less likely to droop. The stand will work forย iPad Air minis, iPad Pro 12.9, 10.5, 9.7, and tablet computers from 4.7โ- 13โ. This stand has a reasonably good height adjustment (from 4’3″ or 130cm to 5’22 or 160CM) and the circular base is stable and heavy at 4.8kg. It’s worth remembering that this weight and style (i.e not a foldable tripod style) means it’s not very portable, but it is an good offering for home and studio use.
If you are looking for a cheaper option the offering from TGI is an affordable offering. There is a reasonably sturdy C clamp style fitting which attaches to a mic stand or a music stand, and the fittings that hold the tablet are that hold your tablet are plastic, but not of the best quality . In theory it will work for tablets from 7 inch to 10.1inch, and while it worked for me, I have read that it isnโt 100% suitable for all tablets out there. OK all in all, but not outstanding and if you have an expensive tablet or iPad, I would spend a bit more on a better quality option. ย
These days attaching your tablet pc or iPad is an important accessory for the majority of musicians. Before you buy, weโd recommend taking a few minutes to think about what you need: Clip-on holders are great if you already have a good music stand or mic stand (just make sure the stand is robust enough to hold the holder and tablet/ipad/phone). If you need the whole thing, a tripod or solid base stand with a holder for your tablet instead of a desk to hold your sheet music, do you want a gooseneck stand, which is very flexible in terms of the viewing angle, or the more traditional style height adjustable stand? If you have a device with a large screen, the clips can sometimes be quite difficult to attach, so we would recommend you check the spec before buying to make sure it will comfortably hold your device. They all have landscape and portrait positions, but sometimes the clips mean you canโt always attach your Apple pencil (or equivalent) at the same time. Not a big issue, butโฆ
Weโve yet to find a cheap stand we can recommend, so unless you have and old or really cheap tablet, or a good insurance policy and donโt really mind if it gets broken, is it really worth taking the risk?
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.